Devices

img7

DEVICE NAME – MVT 300

We have affixed all Components detail & Installation Instructions in our Box. Yet we prefer your Car Electrician do understand these in details before start installation.
myvehicletracker myvehicletracker myvehicletracker
  • • Check all components in Box including SIM.
  • • Insert SIM correctly in Tracker Device
  • • “ON” Sim Zone Button so all 3 Lights in SIM Zone Blink ( Blue, Red & Green )
  • • Wire in RELAY SOCKET connecting No. 87 ( at Center) be pull out & at the same time Ignition PIN wire attached in Car Socket be pull out.
  • • Here we may need to exchange Metal Clips if both not same.
  • • Now Interchange both wires - Our 87 wire connected in Car Socket ( Ignition PIN) & Ignition Pin Wire to Relay Socket in 87 Positon.
  • • Attach Relay Socket to Relay now.
  • • Wire Connecting 30 in Relay Socket plus Wire Connecting 85 in Relay Socket & our wire connected to Ignition PIN connected in Car Socket be Joint together & Tape.
  • •  RED Wire in Device Socket be fitted in socket block where direct Current Inflow from Car Battery connected.
  • • BLACK wire of Device Socket be connected to any part of Car Body ( Act as Earthing )
  • • GREEN Wire of Device Socket needs to connect to Ignition Key Connector. ( May be connected to our 87 Wire fitted in Car Socket anywhere or in Socket )
  • • YELLOW wire of Device Socket be connected to Relay Socket Wire connecting Point 86.
  • • Relay Socket 85 needs to connect with RED Wire of Device Socket ( To get Electricity - better to connect after Fuse area )
  • • Now Tie up Back Device with any suitable Car Inside Block & rest all Wires be Black Taped together (Ensure no naked wire be there ) . Also Relay Socket be knotted together with Car Socket in suitable way.
img7

DEVICE NAME – MVT 200

We have affixed all Components detail & Installation Instructions in our Box. Yet we prefer your Car Electrician do understand these in details before start installation.
myvehicletracker myvehicletracker myvehicletracker myvehicletracker
  • • Check all components in Box including SIM.
  • • Open all 4 Screws of Device & insert Sim Properly.
  • • Connect Battery to Motherboard so Light start Blink.
  • • Wire in RELAY SOCKET connecting No. 87 ( at Center) be pull out & at the same time Ignition PIN wire attached in Car Socket be pull out.
  • • Here we may need to exchange Metal Clips if both not same.
  • • Now Interchange both wires - Our 87 wire connected in Car Socket ( Ignition PIN) & Ignition Pin Wire to Relay Socket in 87 Positon.
  • • Attach Relay Socket to Relay now.
  • • Wire Connecting 30 in Relay Socket plus Wire Connecting 85 in Relay Socket & our wire connected to Ignition PIN connected in Car Socket be Joint together & Tape.
  • •  RED Wire in Device Socket be fitted in socket block where direct Current Inflow from Car Battery connected.
  • • BLACK wire of Device Socket be connected to any part of Car Body ( Act as Earthing )
  • • Pink Wire of Device Socket needs to connect to Ignition Key Connector. ( May be connected to our 87 Wire fitted in Car Socket anywhere or in Socket )
  • • Grey wire of Device Socket be connected to Relay Socket Wire connecting Point 86.
  • • Relay Socket 85 needs to connect with RED Wire of Device Socket ( To get Electricity - better to connect after Fuse area )
  • • YELLOW Wire to AC-FUEL-DOOR Device Socket be connected to AC Switch.
  • • VIOLET Wire to AC-FUEL-DOOR Device Socket be connected to FUEL Meter
  • • BLUE Wire to AC-FUEL-DOOR Device Socket be connected to Door Light Point
  • • GREEN Wire to AC-FUEL-DOOR be idle one & tapped.
  • • Now Tie up Back Device with any suitable Car Inside Block & rest all Wires be Black Taped together (Ensure no naked wire be there ) . Also Relay Socket be knotted together with Car Socket in suitable way.
img7

DEVICE NAME – MVT 100

We have affixed all Components detail & Installation Instructions in our Box. Yet we prefer your Car Electrician do understand these in details before start installation.
myvehicletracker myvehicletracker myvehicletracker myvehicletracker
  • • Check all components in Box including SIM.
  • • Screw up GPS & GSM Antenna & fix both inside Dash Board
  • • Place SIM in Trey & insert in Device Properly.
  • • Wire in RELAY SOCKET connecting No. 87 ( at Center) be pull out & at the same time Ignition PIN wire attached in Car Socket be pull out.
  • • Here we may need to exchange Metal Clips if both not same.
  • • Now Interchange both wires - Our 87 wire connected in Car Socket ( Ignition PIN) & Ignition Pin Wire to Relay Socket in 87 Positon.
  • • Attach Relay Socket to Relay now.
  • • Wire Connecting 30 in Relay Socket plus Wire Connecting 85 in Relay Socket & our wire connected to Ignition PIN connected in Car Socket be Joint together & Tape.
  • •  RED Wire in Device Socket be fitted in socket block where direct Current Inflow from Car Battery connected.
  • • BLACK 10. BLACK wire of Device Socket be connected to any part of Car Body ( Act as Earthing )
  • • BLACK & BLUE ( Top 2 next to Earth Black) wires of Device Socket to be meant for SOS Button. This is visible outside & if pressed than Alarm ring to Cell Numbers attached.
  • • ORANGE wire of Device Socket be connected to Air Condition.
  • • GREEN wire of Device Socket be connected to Ignition. ( May be connected to our 87 Wire fitted in Car Socket anywhere or in Socket )
  • • WHITE wire of Device Socket be connected to 86 of Relay Socket Wire.
  • • VIOLET wire connects to Fuel Wire. ( Once system set – request to run Car to 10 -15 Km & than let Fuel Tank be full for system’s better reading.
  • • Remaing 2 Wire ( BROWN & YELLOW ) be tapped & of no usage.
  • • Relay Socket 85 needs to connect with RED Wire of Device Socket ( To get Electricity - better to connect after Fuse area )
  • • Now Tie up Back Device with any suitable Car Inside Block & rest all Wires be Black Taped together (Ensure no naked wire be there ) . Also Relay Socket be knotted together with Car Socket in suitable way.
  • • Provision of MIC be there to be fitted below SIM ( a round hole ) . Whenever Registered Mobile dial to inserted SIM than it automatically transmit sound within 5 mtr. Distance .